Technical details: Engine: Single Cylinder, 2-stroke, air-cooled. Bits : 4", 6" and 8. Power: 1.9KW/7500rpm Carburetor with pump. Easy starting system (cord starter). Change bits quickly and easily.Rotational Speed:8500RPM horsepower: 2.4 ps Accessories: 3 bits: 4", 6" and 8. Engine: Single Cylinder, 2-stroke, air-cooled. 3 bits: 4", 6" and 8.
Please remember to close the air door and then pull the starter (don't forget this step, otherwise you will not be able to ignite when you dead lift). Pull the rope starter 3-5 times, the total length of the rope is 70cm, and the safety distance is 30-50cm. If the safety distance is exceeded, the rope will be broken, not the longer the rope is, the better.
After the start is successful, remember to open the damper not to pull the starter when opening the damper. When the damper is opened, too much air enters and there is too little oxygen, it is difficult to start, so pull the starter when the damper is closed.After the machine starts successfully, open the damper. Pulling the starter to the end of 70cm will break the rope; the safety distance is 30-50cm, and pulling the rope hard will cause the rope to break. Note: When using the hand puller, it needs to be buffered. Do not pull it all at once, just pull it to two thirds. Be sure to mix gasoline and two-stroke engine oil before adding it. The ratio is gasoline: two-stroke engine oil = 25:1. Please keep the choke to on position when the machine is in use! The auger is ideal for quickly drilling into the earth in order to set into the ground: fence posts, poles, trees, shrubs etc. Equipped with a 52cc gasoline engine, the auger can be handled by one or two people easily for a wide variety of tasks. Ergonomically designed, it is accurate, easy to use and economical.
Supplied with bits of 4", 6" & 8, the auger can drill holes of various diameters. With this tool, you will be able to perform professional quality work. The Earth Auger has a straight through gearbox, unlike models with a side mounted engine, the straight through design is much more robust and less likely to shear gears.
Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business.A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately.
If it's non-workdays, please kindly be patient and wait till Monday. This item is in the category "Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment Attachments\Post Hole Diggers". The seller is "atyokado" and is located in this country: US. This item can be shipped to United States.